LACO D802 Steam Industrial Ironer
The LACO D802 Steam is a two-roll industrial ironer with a diameter of 800 mm per roll, using steam supplied from an external steam system for heating. It is available with roller lengths from 2,500 mm to 3,500 mm and an ironing bed length of 3.6 m. Its standard ironing production capacity reaches up to 510 kg/hr. With the Air-stream® system, production capacity can reach up to 610 kg/hr according to the manufacturer's technical table.
Ironing Rolls And Moisture Extraction
- Perforated steel rolls: The rolls are made of perforated steel, fitted with an internal spring system and covered with 800 g/m² polyester felt.
- Individual suction for each roll: Adjustable suction helps remove moisture during the ironing process.
- Frequency inverter speed control: Frequency-controlled drive allows adjustment of operating speed.
- Planetary gearbox: The gearbox is mounted directly onto the roll. The speed difference between rolls can be adjusted through the pulley system.
Flexible Ironing Bed For Steam Heating
- Flexible bed construction: The ironing bed is designed to adjust itself to the roll surface.
- Low water content: The bed has a low water content within its heating structure.
- Insulation: The bed is insulated to reduce heat loss.
- Condensate trap: The bed is equipped with a condensate trap as specified by the manufacturer.
- Hydraulic pressure adjustment: Pressure between the bed and rolls is adjusted by an integrated hydraulic system.
- Extended heated bridge: The self-adjusting heated bridge supports moisture evaporation from the linen surface.
Steam Heating System
The LACO D802 Steam uses steam supplied directly from an external system. According to the technical table, the machine has a 6/4" steam inlet and a 1" condensate return connection. Unlike the Gas and Electric versions, the Steam version uses direct steam from an external supply to heat the ironing bed.
PLC Control System
The machine is equipped with a 7.5-inch colour touchscreen and PLC control system to manage ironing programmes and monitor machine operation.
- Programming of up to 49 different programmes.
- Export of operating history, including temperature, speed, faults and programme number, via USB.
- Maintenance notifications and fault notifications.
- Test programme for machine outputs and functions.
- Automatic adjustment of speed and temperature fluctuations when oil temperature changes.
Air-stream® Technology
Air-stream® is LACO's ventilation and air extraction system, designed to enhance moisture evaporation in the ironing zone. According to the operating diagram in the brochure, the system draws in fresh air, supports linen preheating, accelerates evaporation through the ventilated ironing bed and extracts humid air from the machine.
For the D802 Steam configuration, the manufacturer specifies a maximum production capacity of 610 kg/hr with Air-stream®, compared with 510 kg/hr for the standard configuration. These are two different production ratings and should be distinguished when selecting the machine configuration.
Ironing Production Capacity
According to LACO's technical table, the D802 Steam is available with four roller lengths and the following production capacities:
- 2,500 mm roller length: 370 kg/hr; with Air-stream®: 440 kg/hr.
- 3,000 mm roller length: 430 kg/hr; with Air-stream®: 510 kg/hr.
- 3,300 mm roller length: 475 kg/hr; with Air-stream®: 570 kg/hr.
- 3,500 mm roller length: 510 kg/hr; with Air-stream®: 610 kg/hr.
These production figures are based on 50% moisture retention and a steam pressure of 12 bar.
Applications
The LACO D802 Steam is suitable for industrial laundry facilities that need to process large volumes of flatwork linen and have an appropriate steam supply system. With its two 800 mm rolls, roller lengths of up to 3,500 mm and production capacity of up to 610 kg/hr with Air-stream®, the machine supports high-capacity industrial flatwork ironing operations.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn