IPSO ACL80K-25 Chest Heated Flatwork Ironer
The IPSO ACL80K-25 is an industrial flatwork ironer from the Chest Heated range, featuring one 800 mm diameter roll and a heated chest. With a working width of 2,500 mm and a stated ironing capacity of 308 kg/h at 50% moisture retention, this model is designed for commercial laundries handling substantial volumes of flat linen, including bed sheets, duvet covers and table linen.
The distinguishing feature of the ACL80K-25 is its flexible heated chest, which uses circulating thermal oil. Rather than focusing solely on roll diameter or heating power, IPSO combines heat distribution, self-adjusting contact pressure and a large ironing surface to support consistent linen finishing across the working width.
Thermal Oil Heated Chest Technology
The ACL80K-25 features a flexible, single-piece chest manufactured using laser welding. A self-contained thermal oil heating and circulation system distributes heat across the full working width of the chest.
The circulating oil system is designed to maintain an even temperature and help prevent localized overheating. This is an important characteristic of IPSO's chest heated technology, particularly in larger industrial ironing configurations.
Self-Adjusting Contact Pressure
The chest automatically adjusts to apply even pressure over the entire width and length of the roll. This helps maintain consistent contact between the linen, roll and heated surface throughout the ironing process.
800 mm Self-Positioning Heated Bridge
The machine incorporates an 800 mm long self-positioning heated bridge. It is designed to help prevent linen from cooling down or rolling during transfer through the ironing process.
Perforated Steel Roll and Moisture Extraction
The ACL80K-25 features a perforated steel roll with under-springing and 800 g/m² polyester felt padding. This construction provides a suitable contact surface for flatwork ironing.
Suction through the roll helps ventilate moisture during processing. The combination of the perforated roll, padding and suction system supports the ironing and moisture-removal process.
Touchscreen Control and Variable-Speed Operation
The IPSO ACL80K-25 is equipped with a 7.5-inch touchscreen and 50 programs. Operators can select programs according to their daily linen-processing requirements.
A frequency inverter controls the roll drive and allows variable ironing speed. The technical table specifies a speed range of 9–36 m/min, while the product description identifies high-speed operation up to 36 m/min as an option. For gas-heated versions, speed regulation and a modulating burner are included to coordinate ironing speed with heating operation.
Industrial Drive System and Construction
A fully enclosed planetary gearbox is mounted directly onto the ironing roll. The variable-frequency inverter controls the drive system, supporting speed adjustment during operation.
IPSO positions its industrial ironing equipment around robust construction, engineering quality and operational reliability. The manufacturer highlights more than half a century of experience in commercial laundry equipment, with a focus on durable hardware, high-end engineering and service support through its international partner network.
Key Advantages of IPSO Chest Heated Ironers
IPSO develops its Chest Heated range for laundries with substantial ironing workloads. According to the manufacturer's product positioning, the range focuses on four main strengths:
- Energy efficiency: IPSO highlights the energy efficiency of its large flexible chest ironers using thermal oil heating.
- High-volume processing: The operating principle of Chest Heated ironers makes them suitable for demanding ironing workloads.
- Reliable construction: Robust hardware and high-end engineering are emphasized as the foundations of equipment reliability.
- Configuration flexibility: The range offers different sizes, roll diameters and one-roll or two-roll configurations to meet different laundry requirements.
These characteristics are important when comparing IPSO with other industrial laundry equipment brands. Businesses should look beyond nominal output and consider heating technology, chest construction, contact pressure and suitability for their actual operating workload.
Chest Heated vs. Cylinder Heated IPSO Ironers
IPSO presents two main flatwork ironer categories: Chest Heated and Cylinder Heated. Each uses a different heating configuration and addresses different installation and operating requirements.
Chest Heated Ironers
These machines use a heated chest that comes into contact with the ironing roll. Larger flexible chest models use circulating thermal oil to distribute heat across the chest surface. IPSO positions this range for laundries with high linen volumes and demanding ironing workloads.
Cylinder Heated Ironers
These machines use a cylinder-based heating configuration. According to IPSO, the design is more complex but allows a more compact machine layout and higher energy efficiency, making it suitable for laundries with limited installation space.
Businesses should consider Chest Heated machines when high-volume ironing is a priority, while Cylinder Heated machines are worth evaluating when floor space is a major constraint. The final selection should take into account linen volume, linen types, available space and the overall laundry workflow.
Applications of the IPSO ACL80K-25
With a 2,500 mm working width, an 800 mm roll diameter and a stated capacity of 308 kg/h at 50% moisture retention, the ACL80K-25 is suitable for evaluation in professional laundry operations handling substantial volumes of flat linen, including:
- Industrial and centralized commercial laundries.
- Hotel and resort laundry facilities.
- Hospital and healthcare laundry operations.
- Commercial laundry providers serving restaurants, conference facilities and organizations with regular flat-linen requirements.
Available Options
According to the IPSO brochure, the ACL80K range can be equipped with the following options:
- Perforated vacuum feeding belts for easier linen feeding.
- High-ventilation chest for the first roll.
- Higher ironing speed option.
- Delivery table for direct linen collection from the ironer.
- Foot pedal.
- M-Aramid padding.
Option availability should be confirmed according to the selected configuration and operating requirements.
Choosing the IPSO ACL80K-25 for Industrial Laundry Operations
The IPSO ACL80K-25 is designed for businesses requiring a chest heated flatwork ironer with a 2,500 mm working width and high processing capacity. Its key features include a flexible thermal-oil-heated chest, self-adjusting contact pressure, a perforated steel roll with suction and variable-speed drive control.
Before selecting the machine, businesses should assess hourly linen volume, linen dimensions, residual moisture after drying, available energy sources and installation space. Compatibility with washer-extractors, tumble dryers and other linen-finishing equipment should also be considered to ensure that the complete laundry line meets the required production capacity.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: 142 B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn