IPSO ACL80K-30 Chest Heated Flatwork Ironer
The IPSO ACL80K-30 is an industrial flatwork ironer from the Chest Heated range, featuring one 800 mm diameter roll and a heated chest. With a working width of 3,000 mm and a stated ironing capacity of 370 kg/h at 50% moisture retention, this model is designed for commercial laundries processing large volumes of flat linen, including bed sheets, duvet covers and table linen.
A key feature of the ACL80K-30 is its flexible heated chest, which uses circulating thermal oil. This design combines heat distribution across the chest with a self-adjusting contact pressure system to support consistent ironing over the 3,000 mm working width.
Thermal Oil Heated Chest Technology
The ACL80K-30 features a flexible, single-piece chest manufactured using laser welding. A circulating thermal oil system distributes heat across the full working width, helping maintain an even temperature and reduce localized overheating.
The self-contained heating and oil circulation system supports temperature control and machine operation. This is an important characteristic of IPSO's chest heated technology, particularly for industrial machines with wide working surfaces.
Self-Adjusting Contact Pressure
The chest automatically adjusts to apply even pressure over the entire width and length of the roll. This helps maintain consistent contact conditions between the linen, roll and heated surface during ironing.
800 mm Self-Positioning Heated Bridge
The machine incorporates an 800 mm long self-positioning heated bridge, designed to help prevent linen from cooling down or rolling during transfer through the ironing process.
Perforated Steel Roll and Moisture Extraction
The ironing roll is made of perforated steel, with under-springing and 800 g/m² polyester felt padding. Suction through the roll helps ventilate moisture during processing.
The combination of the perforated roll, padding and suction system supports suitable contact conditions and moisture removal during flatwork ironing.
Touchscreen Control and Variable-Speed Operation
The IPSO ACL80K-30 is equipped with a 7.5-inch touchscreen and 50 programs. Operators can select programs according to their daily linen-processing requirements.
A frequency inverter controls the roll drive and allows variable ironing speed. The catalogue specifies a speed range of 9–36 m/min, with higher-speed operation available as an option. For gas-heated versions, speed regulation and a modulating burner are included to coordinate ironing speed with the heating process.
Industrial Drive System and Construction
A fully enclosed planetary gearbox is mounted directly onto the ironing roll. The variable-frequency inverter controls the drive system and supports speed adjustment during operation.
IPSO emphasizes robust construction, engineering quality and operational reliability in its industrial ironing range. In the ACL80K-30, these characteristics are reflected in the flexible heated chest, thermal oil circulation, self-adjusting pressure system and industrial drive configuration.
Key Advantages of IPSO Chest Heated Ironers
IPSO positions its Chest Heated range for laundries handling large ironing workloads. Key characteristics include:
- Thermal oil heating: Helps distribute heat evenly across the chest and reduce localized hot spots.
- Self-adjusting chest pressure: Maintains even contact pressure over the roll surface to support consistent linen finishing.
- Designed for high workloads: Wide working surfaces and chest heated construction address the needs of large-volume laundry operations.
- Flexible controls: A 7.5-inch touchscreen, 50 programs and variable-frequency drive support different operating requirements.
- Heating options: Electric and gas configurations allow businesses to consider their available infrastructure and operating costs.
Chest Heated vs. Cylinder Heated IPSO Ironers
IPSO presents two main flatwork ironer categories: Chest Heated and Cylinder Heated. They use different heating configurations and address different installation and operating requirements.
Chest Heated Ironers
Chest Heated machines use a heated chest that comes into contact with the ironing roll. Larger flexible chest models use circulating thermal oil to distribute heat across the chest surface. IPSO positions this range for laundries with high linen volumes and demanding ironing workloads.
Cylinder Heated Ironers
Cylinder Heated machines use a cylinder-based heating configuration. According to IPSO's product positioning, this range offers a more compact machine design and is worth considering for facilities with limited installation space.
Businesses should consider Chest Heated machines when high-volume ironing is a priority, while Cylinder Heated machines may be more suitable when floor space is a major constraint. The final selection should take into account linen volume, linen types, available space and the overall laundry workflow.
Applications of the IPSO ACL80K-30
With a 3,000 mm working width, an 800 mm roll diameter and a stated capacity of 370 kg/h at 50% moisture retention, the ACL80K-30 is suitable for professional laundry operations handling substantial volumes of flat linen, including:
- Industrial and centralized commercial laundries.
- Hotel and resort laundry facilities.
- Hospital and healthcare laundry operations.
- Commercial laundry providers serving restaurants, conference facilities and organizations with regular flat-linen requirements.
Available Options
According to the IPSO brochure, the ACL80K range can be equipped with the following options:
- Perforated vacuum feeding belts for easier linen feeding.
- High-ventilation chest for the first roll.
- Higher ironing speed option.
- Delivery table for direct linen collection from the ironer.
- Foot pedal.
- M-Aramid padding.
Option availability should be confirmed according to the selected configuration.
Choosing the IPSO ACL80K-30 for Industrial Laundry Operations
The IPSO ACL80K-30 is designed for businesses requiring a chest heated flatwork ironer with a 3,000 mm working width and a stated capacity of 370 kg/h. Compared with the ACL80K-25, this model offers an additional 500 mm of working width and higher stated ironing capacity, making it worth considering when linen-processing requirements increase.
Before selecting the machine, businesses should assess hourly linen volume, linen dimensions, residual moisture after drying, available energy sources and installation space. Compatibility with washer-extractors, tumble dryers and other linen-finishing equipment should also be considered to ensure that the complete laundry line meets the required production capacity.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: 142 B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn