LACO Comfort 500 Electric Industrial Ironer
The LACO Comfort 500 Electric is an industrial ironer from LACO Machinery's Comfort EVO range, using electricity as its heating source. It features a 500 mm roll diameter, with roller lengths ranging from 2,000 mm to 3,300 mm. Maximum ironing production capacity reaches 125 kg/hr, depending on roller length and operating conditions.
Flexible Steel Chest Heated by Thermal Oil
The Comfort 500 Electric uses a flexible steel chest, laser-welded and heated by thermal oil. According to LACO, the chest is designed to adapt to the roll surface, helping maintain contact during the ironing process.
- Laser-welded construction: The ironing chest is made of flexible steel with laser-welded construction.
- Thermal oil heating: Thermal oil is used as the heating medium for the chest.
- Adapts to the roll: The chest is designed to adjust to the roll surface.
- Adjustable hydraulic pressure: The hydraulic system allows adjustment of the chest contact pressure.
Electric Heating System
The machine uses electrical resistance heating, with capacity varying according to roller length. The four roller-length configurations of 2,000, 2,500, 3,000 and 3,300 mm have corresponding heating capacities of 30, 40, 45 and 45 kW.
The thermal oil heating system and flexible steel chest are the construction features LACO specifies for its electrically and gas-heated versions. The brochure also presents energy recovery technology to optimize heat utilization during operation.
Automatic Feeding System
The Comfort 500 Electric can be configured with an automatic feeding system using two clamps in one lane. The clamp and brush system spreads the linen before feeding it into the machine.
- Two-clamp feeding: Linen is automatically held and spread by a set of two clamps in one lane.
- One-person operation: According to LACO, one person can operate the feeding system at a rate of up to 240 pieces per hour.
- Brush-assisted feeding: The brush system supports linen spreading and feeding quality.
Automatic Folding System
The LACO Comfort EVO is presented with an automatic folding system capable of up to three longfolds and three crossfolds. The output configuration can be selected according to the laundry facility's linen handling requirements.
- Longfolding and crossfolding: The system can perform up to three longfolds and three crossfolds, depending on configuration.
- Stacker output: Folded linen is delivered to the stacker.
- Front output: An output configuration can deliver linen to the front, below the machine.
- Rear output: A rear delivery table can be selected when folding is not used.
Folding functions and output arrangements depend on the selected machine configuration.
Control And Operation
- Colour touchscreen: The machine is equipped with a colour touchscreen for operational control.
- 10-inch colour touchscreen: The machine illustration in the brochure identifies a 10-inch colour touchscreen.
- Adjustable hydraulic pressure: The operator can adjust ironing chest pressure through the hydraulic system.
- Suction system: The machine is equipped with a suction system to support operation.
Configuration Options
- Return feed: A configuration that returns linen towards the front.
- Extended feeding table: A feeding table with adjustable height.
- Automatic feeding system: Feeding with a set of two clamps in one lane.
- Folding and stacking system: Automatic folding and stacker output can be selected according to requirements.
Ironing Production Capacity
According to LACO's technical table, the Comfort 500 Electric is available with four roller lengths and the following production capacities:
- 2,000 mm roller length: 75 kg/hr.
- 2,500 mm roller length: 95 kg/hr.
- 3,000 mm roller length: 115 kg/hr.
- 3,300 mm roller length: 125 kg/hr.
These production figures are based on a moisture retention of 50% and an ironing temperature of 175°C.
Applications
The LACO Comfort 500 Electric is suitable for industrial laundry facilities that need to iron flatwork linen using electric heating. With a maximum production capacity of 125 kg/hr, the machine can be configured with automatic feeding and linen folding systems to support a continuous linen processing workflow.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn