LACO Comfort 600 Gas Industrial Ironer
The LACO Comfort 600 Gas is an industrial ironer from LACO Machinery's Comfort EVO range, using gas as its heating source. It features a 600 mm roll diameter, with four roller-length options from 2,000 mm to 3,300 mm. Maximum ironing production capacity reaches 175 kg/hr, depending on roller length and operating conditions.
Flexible Steel Chest Heated by Thermal Oil
The Comfort 600 Gas uses a flexible steel chest, laser-welded and heated by thermal oil. According to LACO, the chest is designed to adapt to the roll surface during the ironing process.
- Laser-welded steel construction: The ironing chest is made of flexible steel with laser-welded construction.
- Thermal oil heating: Thermal oil is used as the heating medium for the chest.
- Adapts to the roll: The chest is designed to adapt to the roll surface during operation.
- Adjustable hydraulic pressure: The hydraulic system allows adjustment of the chest contact pressure.
Gas Heating System
The machine uses a gas burner with a capacity of 91 kW for heating. According to LACO's technical table, the Comfort 600 Gas has a 3/4-inch gas inlet and an exhaust gas duct with a diameter of 125 mm (4 3/4 inches).
The thermal oil heating system combined with the flexible steel chest is the construction specified by LACO for its gas- and electrically heated versions. The brochure also describes energy recovery technology to optimize heat utilization during operation.
Automatic Feeding System
The Comfort 600 Gas can be configured with an automatic feeding system using two clamps in one lane. The clamp and brush system spreads the linen before feeding it into the ironing zone.
- Automatic two-clamp feeding: Linen is automatically held and spread by a set of two clamps in one lane.
- One-person operation: According to LACO, one person can operate the feeding system at a rate of up to 240 pieces per hour.
- Brush system: Supports linen spreading and feeding quality.
- Manual feeding: Manual feeding for small pieces in multiple lanes can be selected according to the operating configuration.
Automatic Folding System
The LACO Comfort EVO supports an automatic folding system capable of up to three longfolds and three crossfolds. The Comfort 600 Gas can be configured with output arrangements to suit the laundry facility's linen processing workflow.
- Longfolding and crossfolding: One, two or three longfolds in one lane can be combined with two or three crossfolds. Folded linen is delivered to the stacker.
- Longfolding with front output: One, two or three longfolds can be selected in one or two lanes. Linen is delivered to the front, below the machine.
- Without longfolding: Linen can be delivered to the rear table or to the top at the front.
Folding functions and output arrangements depend on the selected machine configuration.
Control And Operation
- Colour touchscreen: Listed as standard equipment in the Comfort EVO brochure.
- 10-inch colour touchscreen: Shown in the manufacturer's machine description.
- Adjustable hydraulic pressure: Allows adjustment of the contact pressure between the ironing chest and roll.
- Speed adjustment: Standard ironing speed ranges from 1.5–6.5 m/min, with a high-speed mode of 14 m/min.
- Suction system: Supports operation and moisture extraction.
Configuration Options
- Return feed: A configuration that returns linen towards the front.
- Extended feeding table: A feeding table with adjustable height.
- Automatic feeding system: Uses a set of two clamps in one lane.
- Folding and stacking system: Automatic folding and stacker output can be selected according to requirements.
Ironing Production Capacity
According to LACO's technical table, the Comfort 600 Gas is available with four roller lengths and the following production capacities:
- 2,000 mm roller length: 109 kg/hr.
- 2,500 mm roller length: 140 kg/hr.
- 3,000 mm roller length: 160 kg/hr.
- 3,300 mm roller length: 175 kg/hr.
These production figures are based on a moisture retention of 50% and an ironing temperature of 175°C.
Applications
The LACO Comfort 600 Gas is suitable for industrial laundry facilities that need to iron flatwork linen using gas as the heating source. With a 600 mm roll diameter, roller lengths of up to 3,300 mm and ironing production capacity of up to 175 kg/hr, the machine can be selected with feeding and automatic folding systems to support professional laundry processing workflows.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn