LACO D1202 Gas Industrial Ironer
The LACO D1202 Gas is a two-roll industrial ironer from LACO Machinery's D1200 series, using gas as its heating source. It features two rolls with a diameter of 1,200 mm each and roller lengths ranging from 3,000 mm to 4,000 mm. Standard ironing production capacity reaches up to 945 kg/hr; with the Air-stream® system, production capacity can reach up to 1,085 kg/hr according to the manufacturer's technical table.
Two 1,200 mm Diameter Rolls
- Two-roll configuration: The machine uses two rolls, each with a diameter of 1,200 mm, providing a large contact surface for flatwork ironing.
- Space-efficient design: LACO presents a design that increases the ironing surface while reducing the required installation footprint compared with an equivalent configuration.
- Individual suction per roll: Each roll has its own suction system to help remove moisture during ironing.
- Speed adjustment: The drive system supports a standard operating speed of 9–11 m/min and a high-speed mode of 36–45 m/min.
Flexible Steel Ironing Bed
The D1202 Gas uses a flexible laser-welded steel bed controlled by oil pressure. According to LACO, the bed is designed to adapt to the roll surface, helping maintain contact during the ironing process.
- Laser-welded construction: The flexible steel bed is manufactured using laser-welding technology.
- Self-adjusting design: The bed adapts to the roll surface during operation.
- Hydraulic pressure adjustment: Contact pressure between the bed and rolls is controlled by the hydraulic system.
- Individual roll heating: Heating can be adjusted for each roll, combined with an extended heated bridge.
Gas Heating System
The LACO D1202 Gas uses two gas burners. Burner capacity depends on the roller-length configuration, with 439 kW specified for the 3,000 mm roller configuration and 500 kW for the 4,000 mm roller configuration in the manufacturer's technical table.
The heating system works with the flexible steel bed controlled by oil pressure. LACO also presents energy recovery technology to optimize heat utilization during operation.
Control And Operation
- 7.5-inch colour touchscreen: The PLC system with a colour touchscreen supports machine control and operational monitoring.
- Adjustable bed pressure: The hydraulic system allows adjustment of contact pressure between the bed and rolls.
- Speed adjustment: Standard ironing speed ranges from 9–11 m/min, with a high-speed mode of 36–45 m/min.
- Individual suction per roll: The suction system helps remove moisture during ironing.
- Feeding belt extraction: The machine includes a feeding belt extraction system with a 1.1 kW motor.
- Service gangway: The design includes a gangway for machine inspection and maintenance.
- Easy-to-change tape: The brochure highlights a tape design that is easy to replace.
Air-stream® Technology
Air-stream® is LACO's optional ventilation and air extraction system, designed to enhance moisture evaporation in the ironing zone. According to the technology diagram in the brochure, the system draws in fresh air, creates an accelerated evaporation zone through the ventilated ironing bed and extracts humid air from the machine.
For the D1202 Gas, the specified maximum production capacity is 945 kg/hr in the standard configuration and 1,085 kg/hr with Air-stream®. These are two different production ratings and should be distinguished when selecting the machine configuration.
Optional LACO Typhoon® System
LACO Typhoon® is an optional system that automatically spreads linen at the machine input. It helps prepare linen before it enters the ironing zone.
Ironing Production Capacity
According to LACO's technical table, the D1202 Gas is available with four roller lengths and the following production capacities:
- 3,000 mm roller length: 710 kg/hr; with Air-stream®: 810 kg/hr.
- 3,300 mm roller length: 780 kg/hr; with Air-stream®: 895 kg/hr.
- 3,500 mm roller length: 830 kg/hr; with Air-stream®: 950 kg/hr.
- 4,000 mm roller length: 945 kg/hr; with Air-stream®: 1,085 kg/hr.
These production figures are based on a moisture retention of 50% and an ironing temperature of 180°C.
Applications
The LACO D1202 Gas is suitable for industrial laundry facilities that need to process large volumes of flatwork linen using gas heating. With two 1,200 mm diameter rolls, roller lengths of up to 4,000 mm and standard production capacity of up to 945 kg/hr, the machine is designed for large-scale industrial flatwork ironing operations.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn