LACO D802 Gas Industrial Ironer
The LACO D802 Gas is a two-roll industrial ironer with a roll diameter of 800 mm per roll, using gas as its heating source. It is available with roller lengths from 2,500 mm to 3,500 mm and an ironing bed length of 3.6 m. Its standard ironing production capacity reaches up to 565 kg/hr under the manufacturer's stated test conditions. With the Air-stream® system, production capacity can reach up to 670 kg/hr.
Ironing Rolls And Moisture Extraction
- Perforated steel rolls: The rolls are made of perforated steel, fitted with an internal spring system and covered with 800 g/m² polyester felt.
- Individual suction for each roll: Adjustable suction helps remove moisture during the ironing process.
- Frequency inverter speed control: Frequency-controlled drive allows adjustment of operating speed.
- Planetary gearbox: The gearbox is mounted directly onto the roll. The speed difference between rolls can be adjusted through the pulley system.
Flexible Steel Ironing Bed
- Flexible laser-welded steel bed: The ironing bed is designed to adjust itself to the roll surface.
- Thermal oil heating: In the gas-heated version, the bed is divided into several chambers and heated by circulating thermal oil.
- Hydraulic pressure adjustment: Pressure between the bed and rolls is adjusted by an integrated hydraulic system.
- Extended heated bridge: The self-adjusting heated bridge supports moisture evaporation from the linen surface.
Gas Heating System
The LACO D802 Gas uses two gas burners with a combined capacity of 378 kW. According to the manufacturer's brochure, the machine is equipped with fan-assisted modulating Low-NOx gas burners, adjustable gas valves and an integrated thermal oil heat exchanger.
- Modulating Low-NOx burners: The burner system can adjust its heating output.
- Heat exchanger: Features a heavy multi-piping heating coil construction.
- Efficiency: The manufacturer states a heat exchanger efficiency of 94%.
- Temperature control: Each roll incorporates an individual heating system with adjustable temperature control.
- Insulation: The heating system and ironing bed are fully insulated and filled with thermal oil.
PLC Control System
The machine is equipped with a 7.5-inch colour touchscreen and PLC control system to manage ironing programmes and monitor machine operation.
- Programming of up to 49 different programmes.
- Export of operating history, including temperature, speed, faults and programme number, via USB.
- Maintenance notifications and fault notifications.
- Test programme for machine outputs and functions.
- Automatic adjustment of speed and temperature fluctuations when oil temperature changes.
Air-stream® Technology
Air-stream® is LACO's ventilation and air extraction system, designed to enhance moisture evaporation in the ironing zone. According to the operating diagram in the brochure, the system draws in fresh air, supports linen preheating, accelerates evaporation through the ventilated ironing bed and extracts humid air from the machine.
For the D802 configuration, the manufacturer specifies a maximum production capacity of 670 kg/hr with Air-stream®, compared with 565 kg/hr for the standard configuration. These are two different production ratings and should be distinguished when selecting the machine configuration.
Ironing Production Capacity
According to LACO's technical table, the D802 Gas is available with four roller lengths and the following production capacities:
- 2,500 mm roller length: 430 kg/hr; with Air-stream®: 510 kg/hr.
- 3,000 mm roller length: 490 kg/hr; with Air-stream®: 580 kg/hr.
- 3,300 mm roller length: 530 kg/hr; with Air-stream®: 630 kg/hr.
- 3,500 mm roller length: 565 kg/hr; with Air-stream®: 670 kg/hr.
These production figures are based on a moisture retention of 50% and an ironing temperature of 180°C.
Applications
The LACO D802 Gas is suitable for industrial laundry facilities that need to process large volumes of flatwork linen. With its two 800 mm rolls, roller lengths of up to 3,500 mm and gas heating system, the machine is designed for high-capacity flatwork ironing operations.
Need Advice on the Right Solution for Your Business?
Contact PAN for advice on a solution that meets your actual business requirements.
PAN Trading JSC
Hotline: (+84) 28 3840 2222 | 0919 302 879
Address: No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
Website: pantrading.vn | thietbigiatcongnghiep.com
Email: contact@pantrading.vn